This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

12Fifties Truck Motor Mount Connector & Carbon Panel with Motor Axle support - TWIN

12Fifties Truck Motor Mount Connector & Carbon Panel with Motor Axle support - TWIN TRAMPA 12Fifty Extra Wide Longboard Truck Clamping Disk 12Fifties Extra Wide Longboard Trucks Carbon Fibre Motor Mount Panel M5 x 16mm Hex Head Bolt ISO 4017 Marine Grade Stainless Steel M5 Washer Marine Grade Stainless steel - Slim ISO 7089 M6 x 10mm Grub Screw Marine Grade Stainless Steel - Locks Motor Mount to Hanger for Longboard Trucks CARVE BOARD Motor Axle Support for Motor Mounts  M4 x 16mm TORX Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel M4 x 10mm TORX Dome/Button Headed Head Bolt Marine Grade Stainless Steel TORX
RRP
£150+

12Fifties Extra wide Longboard Truck Motor Mount Truck Connector - T6 Aluminum BLACK

This simple but stylish T6 Aluminum 12FIFTIES Motor Mount Connector is specifically designed to work with TRAMPA's 12FIFTIES Extra wide Lonboard Trucks & is potentaillly compatible to fit with many similar Longboard Trucks too :-)

The Motor Mount Connector snuggly slides over the 12FIFTIES Truck Hanger & is secured tightened into position on the hanger with MARINE GRADE M6x10 grub screws.

The premium quality carbon Mounting Panel is held in position by being sandwiched between the Motor Mount Connector & the 12FIFTIES Truck Backplate. Compatible with Electric Motors with long or short Motor Axles - you’ll be able to fit pretty much any electric motor you wish but works best when accompanied with a TRAMPA motor for sure as we use a longer Motor Axle shaft whis this supported by a Motor Mount Axle shaft support housing...

Screwing through the 12FIFTIES Carbon Fibre Motor Mount panel & into an additional 12FIFTIES Backing plate holds everything in position for your motor to mount. These parts can be purchased as a kit on this link

TRAMPA 12Fifty Extra Wide Longboard Truck Clamping Disk

Extra Wide Longboard Truck Clamping Disk fits the Carbon Fiber Motor Mount to the New TRAMPA 12.5 Inch Wide 50º Longboard Trucks

Motor Axle Support for Spring Truck Motor Mounts UNIVERSAL

This part ensures your motor is supported and the belt is running straight - two very important jobs for a smooth, fast and reliable board.

Motors with longer axles, like TRAMPA’s own, will fit perfectly into the housed bearing within, supporting the axle rotation, ensuring there is no ‘give’ in the axle, where the belt could potentially slip off at high speeds.

Fitting onto Channel Truck Motor Mounts this Motor Axle Support will work with any of the 6-9inch tyres in the TRAMPA range.

M5 x 16mm Hex Head Bolt ISO 4017 Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 x 10mm TORX Dome/Button Headed Head Bolt Marine Grade Stainless Steel TORX

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 x 16mm TORX Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M6 x 10mm Grub Screw Marine Grade Stainless Steel - Locks Motor Mount to Hanger for Longboard Trucks

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

Longboard & Skateboard Bearings (8 x 22 x 7mm) Red Black Blue White or GREEN Ceramic sidewalls ABEC 7 608

TRAMPA's Longboard bearings will fit to all classic Longboard & Skateboard Wheels.

TRAMPA's Skate sized 608 Bearing (8 x 22 x 7mm) is internationally known as 608 2RS Longboard Bearing or Skateboard Bearing. It is the High Precision stock choice of bearing supplied with all TRAMPABOARDS that use 8mm Axles.

TRAMPA's 608 Skate Bearing has been polished to a an above genuine ABEC 7 quality rating & offers fantastic performance to the user. This Bearing will spin very fast for prolonged periods & it with regular servicing & a few drops of Speed Cream every now & then will last you a very long time. too. The internal Ball Bearings are mounted in a stainless steel raceway & are coated in very fine grease similar to the properties of Speed Cream.

As with all of TRAMPA's Bearings this Longboard Bearing has been fitted with Friction Free (contact-less) Removable Shields making servicing really easy. To Service your Bearings use a sharp knife or 'Pick' to carefully take out the Removable Sleeves from the bearing & clean/soak the bearings in a pot of Petrol or Thinners. Once clean, dry thoroughly & add a few drops of Speed Cream. A few drops is more than enough so don't go pouring loads in, the oil just needs spreading over all of the surfaces so pop them on the axle & give them a spin to spread the cream evenly & only add 1 more drop of Speed cream if necessary. Remember to wipe up any excess cream spinning out of your bearings onto your wheels as this will attract dust & dirt looking messy in turn.

& add a few drops of Speed Cream. A few drops is more than enough so don't go pouring loads in, the oil just needs spreading over all of the surfaces so pop them on the axle & give them a spin to spread the cream evenly & only add 1 more drop of Speed cream if necessary. Remember to wipe up any excess cream spinning out of your bearings onto your wheels as this will attract dust & dirt looking messy in turn.

TRAMPA's 12-FIFTIES Motor Mounts have been designed to be ORRSOM! With breath-taking performance, offering 13-15 tooth gearing options on the motor side & harmonious gearing to match on the slave wheel, there are endless setup options for all kinds of rider & terrains.

Using premium carbon mounting panels & T6 aluminium Truck connectors, the finished motor mounts have an amazing strength-to-weight ratio.

Whether you set up with 83 or 90mm STICKIES Longboard wheels, 125mm GUMMIES Longboard wheels or the 165mm URBAN TREADS pneumatic Tyres, 12FIFTIES Longboard trucks mount at 3 different heights, allowing a variety of wheels to fit.


This simple motor mounting kit is as versatile as they come - working flawlessly with our 12-FIFTIES Longboard Trucks, as well as other brands’ trucks and wheels, and a huge variety of motor & pulley sizes.

Essentially, this kit is the barebones of your motor system - giving you the freedom to pick, choose, and customise what your final product will be!

The Motor Mount Connectors snuggly slide over the truck hanger and are secured tightly with MARINE GRADE M6x10mm grub screws. The Premium Quality Carbon Mounting Panel is sandwiched tightly between the Motor Mount Connectors, & is fitted with a support for long motor axles. The Motor Axle Support houses a precision 608 bearing, supporting axle rotation & ensuring the motor is as secure & efficient as possible. The Motor Axle Support will only work with motors that have longer axles - such as TRAMPA’s very own 118kv or 136kv Brushless Motors.

In this kit you get the following items -
2x 12FiFties Truck Connectors
2x 12FiFties Truck Clamping Disks
2x 12FiFties Carbon Motor Mount Panel - Fits regular & Goofy
8x M5x 16mm HEX HEAD Marine Grade Stainless Steel Bolt
8x M5 Washers for HEX Bolts
8x M6x 10mm Marine Grade Stainless Steel Grub Screw
2x Universal 8mm Motor Axle Support Bearing Housing - Any Colour
2x Pressed in R608 8x22x7mm ABEC TRAMPA Bearing for Motor Axle Support Housing
6x M4x 16 Capped Head TORX Marine Grade Stainless Steel TORX Bolt
6x M4 x 10 DOME Head TORX Marine grade Stainless Steel
Weight: 374g
What Colour Motor Axle Support do you want?
What Colour Motor Axle Support do you want?

Motor Axle Support - BLACK
Motor Axle Support - BLACK

Motor Axle Support - BLUE
Motor Axle Support - BLUE

Motor Axle Support - BRONZE
Motor Axle Support - BRONZE

Motor Axle Support - GOLD
Motor Axle Support - GOLD

Motor Axle Support - GREEN
Motor Axle Support - GREEN

Motor Axle Support - GUNMETAL
Motor Axle Support - GUNMETAL

Motor Axle Support - PINK
Motor Axle Support - PINK

Motor Axle Support - PURPLE
Motor Axle Support - PURPLE

Motor Axle Support - RED
Motor Axle Support - RED

Motor Axle Support - SILVER
Motor Axle Support - SILVER

What colour 608 Longboard Bearing do you want?
What colour 608 Longboard Bearing do you want?

BLUE 608 (8x22mm) Longboard Bearings x1
BLUE 608 (8x22mm) Longboard Bearings x1

BLACK 608 (8x22mm) Longboard Bearings x1
BLACK 608 (8x22mm) Longboard Bearings x1

RED 608 (8x22mm) Longboard Bearings x1
RED 608 (8x22mm) Longboard Bearings x1

WHITE 608 (8x22mm) Longboard Bearings x1
WHITE 608 (8x22mm) Longboard Bearings x1

CERAMIC 608 (8x22mm) Longboard Bearings x1 (+£2.50)
CERAMIC 608 (8x22mm) Longboard Bearings x1 (+£2.50)

Quantity required:
We have enough parts to make…  
RRP £150 - for the complete set

Excluding VAT
HCC: 8302300090

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon