This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

6376 3800w 160Kv DC TRAMPA Motor with Filters

6376 3800w 160Kv DC TRAMPA Motor with Filters TRAMPA's own 6376 160Kv 3800w DC Brushless Motor - 300mm Sensor Cables Box Motor End Filter - Star Holder Motor Filter - Stainless Steel wire mesh Holds in place using the motor filter attchment plate M3 x 4mm Dome Headed Head Bolt DIN6912 Marine Grade Stainless Steel Stainless Steel Motor out filter wraps around the base of the motor preventing dust n debris from entering the motor
RRP
£222
inc tax

M3 x 4mm Dome Headed Head Bolt DIN6912 Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

This Bolt is DOME HEADED, meaning that when screwed into position it sits low & neatly over the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-TRAMPA MOTORS

M3 x 4mm Dome Headed Head Bolt DIN6912 Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

This Bolt is DOME HEADED, meaning that when screwed into position it sits low & neatly over the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-TRAMPA MOTORS

TRAMPA's own 6376 160Kv 3800w DC Brushless Motor - 300mm Sensor Cables Box

TRAMPA's very own purpose made 160 KV Fully HALL & TEMPERATURE censored BLDC & FOC 6376 Out-Runner Motor provides 160RPM per volt. It has been CUSTOM MADE to handle HIGH VOLTAGE SET-UPS, i.e 26-60V using for example the VESC speed controllers. The Motor easily switches between FOC & BLDC modes running effortlessly in either mode.

The Motor features Ultra high Temperature Copper & the highest grade of Neodymium Magnets available today. We designed an Extended & Heat treated 8mm Steel Axle shaft that's locked in position using 5 high precision Japanese Bearings and double keyway. All screws & fixings used in its assembly are Marine Grade Stainless Steel, this motor easily out performs all & any competition on the market in so many aspects & its applicational use is almost endless!

Our special design allows you to to also fit  metal mesh filters to prevent the impregnation of larger particles ending in your motor! The front sided motor shield is equipped with twelve M4 treads, sitting on a 44mm diameter circle. The extra threads will allow you to mount the motor in the exact angle you wish, so that the three motor cables always sit in the perfect angle towards the mount or deck.

When handling and inspecting the motor, the copper's appearance is almost dark red, suggesting very high quality + looks very special on first impression. 

TRAMPA's 160 kv Motor is fitted with an 38.5mm x 8mm (Extra long) Heat Treated Hardened Steel Motor Shaft, which is also fitted with a 12x3x3mm KEYWAY locator as standard! The extra length of the Axle allows us to fit Extra wide Motor Pulleys, meaning we fit a 16mm wide HTD 5M STRONGBELT as standard. A wider belt guarantees a much stronger power delivery. The end of the motor axle is supported with the use of a Bearing that is located in a Fixed housing, soaking up the strain of the powerful motor, & eliminating the possibility of bending the motor axle... Two 3x3x12mm KEYs lock the Axle shaft at both ends (1 into the Rotor & 1 into the Motor Pulley), eliminating all & any "Motor slip", thus providing maximum performance to the rider & gaining critical data for the VESC, ensuring all its high tech facilities can run as expected. TRAMPA's special motors are fitted with internal Hall Sensors.

The Rotor Section of the motor has been powder coated black & finished with a very stylish Gold TRAMPA Logo whilst the vented Aluminum end plates of the motor have been color coordinated Anodised Natural. The Heavy Duty power cables use 4mm Gold Plated Bullet Connectors to connect to a power source. Typically for TRAMPA only Marine Grade Stainless Steel Fixings have been used in the assembly of this motor. & no parts will rust on you. This Motor can be connected to any of the Motor Pulleys in the TRAMPA product range amongst others out there on the market...

1x 6364 118Kv Premium TRAMPA Motor
1x STAR shape holder for locking mesh in position
1x Stainless Steel End Filter
5x Stainless Steel End Filter Screws
1x Stainless Steel Wrap around filter
6x Stainless Steel Wrap around filter screws
Weight: 750g
Quantity required:
RRP £222 - per motor

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon