This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

35° SHORT TRAMPA Kiteboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit

35° SHORT TRAMPA Kiteboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit 13ply 35° SHORT Original 9-69 TRAMPA Mountainboard or Kiteboard Blank Deck Drillage for Trucks - Accurate and neat Drillage for Bindings, countersunk with neat finish Drillage for Grab Handle - Neat proffessional finish Edging of deck for a Regular Deck 2 x 9 Inch squares of Top Quality Jessop Grip tape M5 x 25mm Marine Grade Stainless Steel Hex Head SPRING Truck Bolt kit - 12/17ply 35º SOLID Decks M6 x 25mm Marine Grade Stainless Steel Countersunk Binding Bolt Kit for all 13 - 17ply TRAMPA Decks
RRP
£175
inc tax
schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...

 


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.


 


The 35° Short TRAMPA Kite deck is the perfect option for advancing "teenage sized" riders & "smaller adult" sized riders. Being shorter in overall length, its excellent for big airs, fast rotations & any types of freestyle use..... The 35° tip means it needs to be fitted to spring trucks. The Spring Trucks are much stronger than Skate Trucks as they also offer a lot more custom adjustment, resulting in more stability to the rider, especially when compared to the 15° deck on Skate Trucks. It can be used for Mountain Boarding or Kite Boarding & is often purchased as a Blank deck as an Up-Grade to replace a broken or non responsive wooden deck supplied by other brands & therefore it will also fit to Scrub Channel & MBS Matrix Trucks.

The 35° Short is available in 4 different flex rates, 12ply is the most flexible, 15ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° Short can be supplied as a Blank deck, Drilled, Edged & Sanded, Gripped or with TRAMPA Treads & with/without a complete deck Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

 

TRAMPA™ decks are made from a re-enforced glass and plastic thermo composite and the material was originally developed for light-weight military purposes having superior strength to weight ratios compared to alternative materials. The formed fabric once baked, is able to with stand huge impacts and forces whilst still being able to flex's like most other strong materials cant.

Since our first existence in 2003 nobody, to our knowledge, has been able to break an original shaped TRAMPA deck making us proud to suggest to you that our decks are totally un-breakable when used for their intended purpose,

The TRAMPA™ 15° deck is sold as an upgrade to non responsive  wooden decks and is easy to fit as a replacement for a damaged deck, and can fit all skate style truck systems regardless of their brand. Suitable truck systems which fit to the trampa 15 degree deck include, Scrub, Kheo, Mbs, grassboard, Exit,  kitedeck revolution, G4-s, NoSno Bio Hazard daisy cutter, mongoose, earthboard.

It is specially formulated, and presented in a workable matter in a thread like format, just like cotton. From there, we weave the thread to our desired width, and place it onto a roll. Polished & pre shaped alluminium moulds are used to give the material the dimensions we require. By varying the layer quantity used, we are able to control the amount of flex and pop in the deck, allowing us to custom make the deck for the customers height weight, style, rider type and riders abillity. A special seal is used to help with the large pump to create a high pressured vaccume. The mould is then placed in the oven, still under a vaccume, to cook, just like a cake. At this point ee refer to the resulting product as the Motherboard.

Once cooked the exterior moulds are removed & the motherboard is taken to the water jet cutting bed to neatly remove the individual decks from the motherboard. The datum marks are fed into the machine for accuracy and water is mixed with a very fine particle sand which is then blasted out of  the nozzell under a pressure of 60,000 Psi. (thats enough pressure to cut through 9 inch titanium!) which results in a razor sharp finish to the edge of the deck.

The decks then need to be finished by hand... A jig is used to drill the truck holes, and the binding and grab handle fixing holes are measured and drilled by hand. Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various types sandpaper. The finer the sandpaper used the finer the finish to the edge of the deck will be.... spend some time on your deck, show it some love and give it a good rub.....

We can make the TRAMPA™ decks as stiff or as flexi as you would want it to be. Generally speaking the stiffer the deck is the heavier the rider is, so the weight of a Trampa deck is often relative to the weight of the rider, so lightweight isnt always the best thing as its important for the rider to know that their deck can handle their weight for the right applications.....

All TRAMPA™ blank decks are available drilled or undrilled , with or without grip tape, with or without converting nuts and bolts or any other extras you may need. We can drill for your grab handle, fit the grip tape or Trampa Treads and put the stickers on for you if you like, we aim to give you exactly what you want

New to the range, we have just launched an advanced grip tape, known as "TRAMPA Tread". Originally developed for the decking of yachts and other water craft, it is deep grooved and offers superior grip compared to regular grip tape. Excellent for all conditions especially the beach. This can be fitted at the factory when ordering.

 

13ply 35° SHORT Original 9-69 TRAMPA Mountainboard or Kiteboard Blank Deck

TRAMPA's Original 9-69 35° Short Mountainboard deck is the perfect deck option for "Advancing teenagers" & "Intermediate adult" sized riders. Being shorter in overall length, its excellent for big airs, fast rotations & any types of freestyle use but can of course also be ridden down a track or basic Grassy slopes..... The 35° tip means it needs to be fitted to spring trucks. Spring Trucks are much more robust than Skate Trucks. Spring Trucks also offer a lot more custom adjustment, resulting in more stability to the rider, especially when compared to the 15° deck with Skate Trucks. Its dimensions make it excellent for all sizes of rider from youngster to adult starter. It can be used for Mountain Boarding or Kite Boarding.  Its often purchased as a Blank deck or as an Up-Grade to replace a broken or non responsive wooden deck supplied by other brands & will also fit to Scrub channel & MBS Matrix Trucks.

The Original 35° Short is available in 4 different flex rates, 12ply is the most flexible, 15ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° Short is supplied as Drilled, Edged, Sanded with Grip-Tape & of course with a complete deck Marine Grade Stainless Steel Bolt Kit!


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.

M6 x 25mm Countersunk Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-Bindings

M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

2 x 9 Inch squares of Top Quality Jessop Grip tape

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges. Watch your fingers when slicing, please ask an adult to make this work if you are under 16 & please remember, when you draw on the back of the grip tape remember its a mirror image so do everything in switch! Use a template for best results... :-)

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
44 - 70 kg
(7 - 11 stone)
12 ply 2,175g flexi
57 - 83 kg
(9 - 13 stone)
13 ply 2,350g firm
70 - 95 kg
(11 - 15 stone)
14 ply 2,525g stiff
83 - 127 kg
(13 - 20 stone)
15 ply 2,700g very stiff

TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.



The 35° Short TRAMPA Kite deck is the perfect option for advancing "teenage sized" riders & "smaller adult" sized riders. Being shorter in overall length, its excellent for big airs, fast rotations & any types of freestyle use..... The 35° tip means it needs to be fitted to spring trucks. The Spring Trucks are much stronger than Skate Trucks as they also offer a lot more custom adjustment, resulting in more stability to the rider, especially when compared to the 15° deck on Skate Trucks. It can be used for Mountain Boarding or Kite Boarding & is often purchased as a Blank deck as an Up-Grade to replace a broken or non responsive wooden deck supplied by other brands & therefore it will also fit to Scrub Channel & MBS Matrix Trucks.

The 35° Short is available in 4 different flex rates, 12ply is the most flexible, 15ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° Short can be supplied as a Blank deck, Drilled, Edged & Sanded, Gripped or with TRAMPA Treads & with/without a complete deck Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

13ply 35° SHORT Original 9-69 ATB Deck
Precision drilled Truck mounting holes.
Drilled for Bindings with a neat & flush countersunk finish
Countersunk grab handle holes drilled as standard.
Edged with a rough cut file & hand sanded until silky smooth...
2x 9x9 Inch square Jessop Grip Tape
M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel
M5 Nut - Marine Grade Stainless steel Nylock Nut
M5 Washer Form B - Marine Grade Stainless Steel
M6 x 25mm Countersunk Bolt - Marine Grade Stainless steel
M6 Nut - Marine Grade Stainless steel Nylock nut
M6 Washer Form B - Marine Grade Stainless Steel
--------------------------------------------
35º Short Deck Dimensions
Deck Widest Point - 228mm
Tip to Tip Deck Length - 895mm
Axle to Axle Wheel Base - 912mm
Tip Mounting angle - 35º (Spring Trucks)
Please select - Which Ply deck do you require...?
Please select - Which Ply deck do you require...?

9-69 Original 12ply 35º Short - FLEXI
9-69 Original 12ply 35º Short - FLEXI

9-69 Original 13ply 35º Short - FIRM
9-69 Original 13ply 35º Short - FIRM

9-69 Original 14ply 35º Short - STIFF
9-69 Original 14ply 35º Short - STIFF

9-69 Original 15ply 35º Short - VERY STIFF
9-69 Original 15ply 35º Short - VERY STIFF

What colour stickers would you like ?
What colour stickers would you like ?

SILVER Vinyl Stickers
SILVER Vinyl Stickers

BLUE Vinyl Stickers
BLUE Vinyl Stickers

RED Vinyl Stickers
RED Vinyl Stickers

WHITE Vinyl Stickers
WHITE Vinyl Stickers

BRONZE Vinyl Stickers
BRONZE Vinyl Stickers

Pimp Chrome Vinyl Stickers(+£5) - OUT OF STOCK
Pimp Chrome Vinyl Stickers(+£5) - OUT OF STOCK

Quantity required:
We have enough parts to make…  
RRP £175 - per deck

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon