This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

2WD SPUR GEAR DRIVE Electric Mountainboard - FULLY LOADED BigBoi Deck with 21700 Cell Pack, The WAND, a 12A Charger & Bull Bars all included, Shipped fully assembled in a Luxury Travel Bag as standard!!

2WD SPUR GEAR DRIVE Electric Mountainboard - FULLY LOADED BigBoi Deck with 21700 Cell Pack, The WAND, a 12A Charger & Bull Bars all included, Shipped fully assembled in a Luxury Travel Bag as standard!! 2WD SPUR GEAR DRIVE Electric Mountainboard - FULLY LOADED BigBoi Deck with 21700 Cell Pack, The WAND, a 12A Charger & Bull Bars all included, Shipped fully assembled in a Luxury Travel Bag as standard!! 35° 9/73 TRAMPA BigBoi Mountainboard Deck - Fix the WINGS to the deck to add concave & the increase the width of the deck Electric Deck Anodised CABLE TUNNEL Truck mounting Bolt Kit TRAMPA 35° 9/73 BIG-BOI 2WD Electric Mountainboard Deck with WINGS - WINGS give safe cable routing, adds W Shaped concave & the increase the width of the deck from 9 to 10 Inches Custom Mountainboard Truck CNC Precision made 16 or 17 Inch wide Mountainboard Trucks 'Channel Style (Spring) or 'Double King-Pinned' (Skate) Style Custom BULL BARS for MOUNTAIN BOARDS Mountainboard Spur Gear Drive TWIN Motor Mount with PULLEYs - NO Motor, NO Filters 2WD SPUR GEAR DRIVE Electric Mountainboard - FULLY LOADED BigBoi Deck with 21700 Cell Pack, The WAND, a 12A Charger & Bull Bars all included, Shipped fully assembled in a Luxury Travel Bag as standard!! 2x 6376 160Kv TRAMPA DC Motors with Basic Filters  Custom Motor Filters - HALF or FULL Cage - SINGLE MOTOR 21700 2WD Mk III MASSIVE MONSTER Box with 2x VESC 6 Mounting Panel VESC 6 MkVI - TRAMPA gives you Maximum power! VESC 6 MkVI - TRAMPA gives you Maximum power! VESC 6 MkVI - TRAMPA gives you Maximum power! VESC 6 MkVI - TRAMPA gives you Maximum power! 21700 12s7p PCB Cell Pack with BMS fits into the MASSIVE MONSTER box - Holds 84x 21700 cells 12s7p & gives up to 35A of range! 21700 12s7p PCB Cell Pack with BMS fits into the MASSIVE MONSTER box - Holds 84x 21700 cells 12s7p & gives up to 35A of range! CANBUS Cable 24 AWG  Silicon Yellow/White - 200mm VESC Connect NRF Wireless Dongle with INTERNAL Antenna NRF Dongle Extender cable 200mm - VESC 6 Build your own Custom TRAMPA Wheel to fit to your SPUR GEAR DRIVE Motor Mount. You can fit PHATLADS, SUPERSTARSS, PRIMO's or  MEGASTAR's DEEP DISH MEGASTAR's! 8, 9 or 10 Inch wheels of awesome selection for on & off road! Amazing!! Build your own Custom REAR Wheel to fit to your SPUR GEAR DRIVE Motor Mount. You can fit PHATLADS, SUPERSTARSS, PRIMO's or  MEGASTAR's DEEP DISH MEGASTAR's! 8, 9 or 10 Inch wheels of awesome selection for on & off road! Amazing!! (COPY) 12mm Axle ABEC 7 Rated Mountainboard Bearings for HYPA or SUPERSTAR Wheels CUSTOM BINDINGS - Build your own Bindings & colour combo! TRAMPA WAND MAGNETO Remote Control - VESC Based remote gives all the control you could ever wish for TRAMPA WAND MAGNETO Remote Control - VESC Based remote gives all the control you could ever wish for MASSIVE Monster Box HEAVY DUTY / LUXURY protective Cover with Inspection pit & tool Pockets MASSIVE Monster Box - Rugged OXFORD Weave Protective Cover 12s 12Amp 50.4V LI-ION BATTERY CHARGER Luxury Mountainboard Travel Bag - Fits 35º long decks with upto 9 inch wheels inc Motor Mounts & Monster Box perfectly! Also fits your charger, pads, helmet & beer! Luxury Mountainboard Travel Bag - Fits 35º long decks with upto 9 inch wheels inc Motor Mounts & Monster Box perfectly! Also fits your charger, pads, helmet & beer! Luxury Mountainboard Travel Bag - Fits 35º long decks with upto 9 inch wheels inc Motor Mounts & Monster Box perfectly! Also fits your charger, pads, helmet & beer! Luxury Mountainboard Travel Bag - Fits 35º long decks with upto 9 inch wheels inc Motor Mounts & Monster Box perfectly! Also fits your charger, pads, helmet & beer! 8 Inch Muck off bag Complete Deck TRAMPA Handmade VINYL Sticker Kit
From
£2,250+
schematic

35° 9/73 TRAMPA BigBoi Mountainboard Deck - Fix the WINGS to the deck to add concave & the increase the width of the deck

The BigBoi Deck is made for the Big Boys out there! (Anyone with long legs or roughly taller than 5 foot 10 Inch) or riders with a really wide stance. It measures 73cm from crease to crease & comes in 3 flex's to suit just about every rider weight out there.

To fit the Massive Monster Box you must have the BigBoi Deck. By doing so allows you to install the 21700 cell pack & achieve approx 35 miles or range.

Custom Mountainboard Truck CNC Precision made 16 or 17 Inch wide Mountainboard Trucks 'Channel Style (Spring) or 'Double King-Pinned' (Skate) Style

Its Your choice!! Its possible to fit either the time proven 16 Inch Wide Precision Mountainboard SPRING Trucks or the new 17 Inch Wide TRAMPA-IR Double King-pinned Trucks to ANY of the TRAMPA decks with 35º Fixing Angles...

With Spring Trucks you have the ability to be able to adjust your steering resistance on the fly, by simply pressing in a 4mm Allen key into the Spring Adjuster that pokes out from the top of the Truck. Turning the Spring Adjuster clockwise tightens the steering resistance making it stiffer & more suitable for faster or off road riding... You can then increase the firmness of the spring by installing a DAMPA into the middle of the spring... A TRAMPA DAMPA is stack of 3 Urethane balls (the middle one being 50% larger) & the TRAMPA DAMPA supports the Spring as the turning happens giving a nice firm feel to the the turn.... Its possible to fit different hardness dampas in different corners of the deck to give you a real true custom feel...

There are 7 options of Shore hardness of DAMPA (steering resitance) (8 options if you include riding with NO Dampa for the latimate steereing experience) AND as the SPRINGS can be installed in the inside or outside postions, that means there are in total 16 different steering settings when using the SPRINGS in the  TRAMPA Spring Trucks, and now there are even more options, its possible to install the TRAMPA BARRELS with special Anodised BARREL RETAINERS... The BARRELS are Hollow Tubes of rubber with a relatively firm hold compared to an un-supported spring (Un-supported by a Dampa installed in the spring) so the Barrel has a nice firm solid feel from the start of the steering... 

Its possible to install different thickness Barrel retainers (4mm is standard, we offer 5, 6 & 7mm as upgrades), by instaling a thick base Barrel Retainer will in turn increase the steering resistance making for a firmer, tighter steering on the ride... great for speed and larger sized riders...

Both Truck options come in a huge array of anodised colours to choose from & BOTH Stles of Truck will accept ANY of the Mountainboard Motor Mounts That TRAMPA has to offer

Build your own Custom TRAMPA Wheel to fit to your SPUR GEAR DRIVE Motor Mount. You can fit PHATLADS, SUPERSTARSS, PRIMO's or MEGASTAR's DEEP DISH MEGASTAR's! 8, 9 or 10 Inch wheels of awesome selection for on & off road! Amazing!!

TRAMPA's Wheel options are not only all very visually appealing, but the different combinations & material options we offer, including Bearing position options & Bearing size options to pretty much suit all Boards on the planet, as well of the thousands of alternative applications they are used for & all with connectable motor pulleys in the perfect tooth size to give harmonious gearing to match to the size of the assembled wheels with, the appearance & application options and connect-ability is quite fantastically endless....

HYPA Wheels are TRAMPA's Original 6 spoked hub. Using genuine DuPont materials we Plastic inject premium grade Glass/Nylon into a mould. The Superior 6 spoke design gives incredible strength to weight, although they are the cheapest hub TRAMPA offers in the range it is almost un-herd of for these to ever fail, however, being 6 spoked, it is not possible to fit them to the SPUR GEAR DRIVE Slave Pulleys or the 76Tooth OPEN BELT DRIVE Slave Pulley.

SUPERSTAR Wheels are TRAMPA's 2nd hub design. Using the same Plastic injection factory, material & technique to make the center set outer rim, we added Extruded T6  Heat Treated & Anodised 5 pronged spokes that push into the plastic housing & are supported in the center with a Spoke Support Spacer, M4x 40 Bolts push through the entire connection & nutted tight on the other side with M4 Nuts. The M4 Nuts can be removed from the assembly & 44 Tooth Slave pulleys, the 66 Tooth Pro Belt Pulley, or the SPUR GEAR DRIVE can be fitted directly to the hub. Fitting M4 Hex Spacers when connecting the wheels instead of the M4 nuts means you can then using M4x10 Cap or Dome Head bolts, bolt on a 62, 66 or 76 Tooth OBD Slave Pulley, or

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel StrapsHEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.   

VESC 6 MkVI - TRAMPA gives you Maximum power!

READ MORE in the Description Tab above

Introducing the amazing VESC® 6 MKVI Speed Controller, the 6th major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worthy of it’s pimpin’ gold logo.

New features, setting it aprt from the previous MKV edition are: Second UART port, increased current handling, SPI wired IMU, sensor voltage adjustment in software, Spin-To-Sart deactivation option, black anodized housing.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKVI controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

STS (Spin-To-Start) – it’s possible to set your board to power up with a small kick/nudge! This feature can now be enabled or disabled.

 

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters (full phase filters)
- built in, SPI wired  IMU chip (accelerometer, gyro)
- Spin-To-Start
- Auto power off timer, adjustable - Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- full torque from zero RPM
- sensor less position control for most salient motors
- Configurable RPM-, current-, voltage- and power limits
- Input source: CAN, PPM, Analog, NRF
- Communication ports: USB, CAN,UAVCAN,  2x UART, SPI, I²C
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESC controllers
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V, do not use 13S LiIon!
- Current: Continuous 80A, peak 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047 and other encoders

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

Mountainboard Spur Gear Drive TWIN Motor Mount with PULLEYs - NO Motor, NO Filters

TRAMPA WAND MAGNETO Remote Control - VESC Based remote gives all the control you could ever wish for

Introducing the Amazing WAND CONTROLLER

Frank Drenckhahn - King of design & production at TRAMPA & Benjamin Vedder - Creator of the VESC aka the 'Yoda of Electronics', spent the winter period of 2018/19 designing a revolutionary remote controller, with some new & very exciting 'E-Skate-specific-features' to work in direct relation with the VESC / TRAMPA series of products.

There are many basic remote control options already on the market, but none of them hit the high bar when it comes to features & reliability. Here at TRAMPA, we’ve experienced riding with in-sufficient, untrustworthy remotes. Consequently, we’ve always dreamed of holding a reliable, versatile, ever-lasting, informative & safe remote controller, that matches the outstanding performance of the VESC software & the TRAMPA equipment that they’d be so frequently paired up to. You should expect nothing less than magic whilst waving the WAND over TRAMPA assembled VESC Products!!

HARDWARE

High-end TRAMPA Electric boards deserve to be controlled with a high-end remote, you need to be 100% in control over the Monster under your feet! Personally, I always dreamed of something that feels nice in your hands, made of high grade material, with a little bit of weight to represent the same high quality level of our TRAMPA boards, and the cutting edge technology the VESC offers. This remote is made from 6061 T6 (Aero-grade) Aluminum with a sleek carbon fiber battery lid. You can see & feel the quality straight away.

REAL TIME DATA DISPLAY

The WAND is fitted with a circular high resolution OLED display that reveals all the crucial information you want to have at hand while riding your board. The screen might be small, but the list of data it shows is HUGE! You’ll be able to scroll through and see your current speed, average speed, amp draw, duty cycle, average watt hour draw, battery indicator (for both board & remote), recuperation and more to be added through firmware updates!

Whatever data the VESC captures can ultimately be displayed on the OLED screen. Benjamin even added in a few tools to display animated graphics, for ultimate pimpness!

SMART REVERSE

Ever over shot the junction & wished you could reverse a little to pull you back from the traffic? Well now with the WAND in your hand, pulling back on the Thumb Controller bringing you to a stop & keeping your thumb in the braking position will automatically instigate the Smart reverse feature which will ramp up enough Amps to switch the rotation direction of the motor but just at slow speed so that the board reverses you out of trouble..... A very very clever feature designed to keep our clients safe...

SAFETY & GESTURE Control: AN OUTLOOK TOWARDS FUTURE FW UPDATES

What is really exciting is the IMU (Inertial Measurement Unit) inside The WAND... The IMU knows the exact orientation of The WAND in space and gathers acceleration values of all the space axis at the same time, acceleration, speed & elevation. Using the IMU, Benjamin will in future be able to code some really useful safety features, as well as some playful things. For instance; one day the remote will be able to tell if you take a tumble & will be able to stop your board safely. It will know when it is resting upside down on a surface, and refuses to send accidental signals to the board. Powering up when you pick it up & going to sleep after 5 minutes of inactivity The WAND is smart enough to save its own battery! It can even be used as a water spirit level, helping you to align things perfectly! Expect some nice FW updates in the FUTURE. IMU features will become available over a period of time!

TRANSFORM YOUR REMOTE

On top of the features mentioned above, amazing piece of tech features the options to either be converted to a pistol grip style trigger remote, or to have an additional small trigger on the lower side to allow additional index finger control. I like to use my index finger to send acceleration commands, while using my thumb to send brake signal commands. Others want to use their thumb or index finger only. Much alike TRAMPA’s boards, these remotes are made to be customised around you!

SAFE KEEPING

We’ve all wasted too much time on the pre-riding ritual known as “Where the **** did I leave the remote?!” Well no more. We decided to equip The WAND with a Magnetic bottom panel. A small metal sheet or magnet attached to your board (stick a big washer to your Battery Box or similar), will keep your remote safe where it belongs all the time, or you simply keep your remote on the fridge, next to the car keys! 

BATTERY LIFE

Battery life has always been an issue in the past. Sometimes you want to go out for a ride, but you forgotton to charge up your remote. Then after a quick charge, you end up worried that it‘ll die before the end of your ride.

When Frank & Benjamin designed this remote, ultra low energy consumption was a prime goal to achieve.

We chose to use standard AAA batteries, so that you can easily carry spares & swap them out - like changing the batteries on your TV remote, giving you ultimate confidence that you will never ever run out of battery. Two tiny AAA cells are good for 30 hours of constant operation. AAA cells are available at gas stations, supermarkets, drug stores, or even in a remote house in the middle of nowhere in a kitchen draw, should you get real desperate while out on your endless trails!

SOFTWARE & SUPPORT

We don't want you to have to buy a new remote because the software becomes outdated, so we made sure this remote would have a USB & SWD port, allowing you to easily flash the latest firmware, and unlock the latest features when they get released. This remote is future proof & will surprise you many times over its life. The Wand Firmware will be Open Source. Please browse Benjamin Vedders Github for source files and copyright information : https://github.com/vedderb

COMPATIBILITY

This remote is fully compatible with the TRAMPA NRF Dongle. An NRF connection is required to pair the Controller to the VESC device. Depending on if or when you bought the dongle, you might need to update its firmware in order to make the connection to the controller though the VESC, which is a simple task. This remote is compatible with any ESC that is based on VESC technology, and running the VESC firmware. Simply plug the TRAMPA NRF Dongle into the UART port of your ESC.

CALIBRATION AND MULTIPLE BOARDS

This remote doesn't require calibration. A simple one click pairing procedure does the trick. This remote will become a solid partner to all your boards.  No more need for multiple remotes for lots of boards, unless you want to ride out with your friends. In which case you can leave your old PPM remote receiver plugged in & switch over to that using the VESC-Tool App.

In order to connect The WAND to your VESC or VESC based ESC, you will need to do a Firmware update on that ESC. Simply plug the TRAMPA NRF Dongle into your VESC & pairing is pretty much automatic, just follow the on-screen instructions. The TRAMPA NRF Dongle can be updated to the latest, compatible FW, using the latest desktop VESC-Tool.

Technical features for the WAND;

- Stable & safe with NRF wireless connection

- High resolution OLED display

- 2x AAA standard size battery which will give over 60 hours of battery life

- Exterior dimensions:144 x 31x 22mm

- Full Aluminum 6061 T6 SOLID CNC'd housing - Anodized Black with Laser Logo's

- Magnetic bottom panel. The remote sticks to metal surfaces for safe keeping.

- Easy connectable to thousands of devices

Modes that the WAND can control;

- Forwards

- Brake

- Reverse

- Cruise Control

- Pre-programmable to allow you to select between performance setups so you can switch between defined user profiles. Adjusts power levels, acceleration, top speed brakes performance. Define Profiles for Learner, Intermediate & Advance riders who will all prefer different setup's

OLED Display will show you;

- Current Speed

- Average Speed

- Amp Draw

- Battery status of Remote

- Battery status of Board its connected too

- Duty cycle

- Estimated range

- Watt Hour Consumption

- Many many more features yet to be written about :-)

Saftey;

- Shock sensor (will become available via future Firmware update)

- No signal when remote is turned head over (e.g. trigger resting on surface)

- Safe NRF based wireless communication

- Safe pairing to board

- No calibration needed

- No interference with other remotes (group rides)

- Auto power off, auto power on

- Regular firmware updates available

ADDITIONAL FEATURES

- Your Android Phone or Mobile device with the VESC App & the WAND remote will share the same connection to VESC giving seamless connectivity.

- Firmware can be updated via VESC-Tool

- Works with existing TRAMPA NRF Dongles (Dongle may require a Firmware update)

- Different size triggers to fit different sized fingers

- Can be transformed to be a 'Finger Trigger' style remote where an additional feature of adding a Handle for comfy holding

- Can be transformed to have 'Thumb Stick' & 'Small Trigger' on lower side (use index finger for acceleration and thumb for brakes)

- Built in IMU (gyro and accelerometer) Be surprised what magic this can do in the future.

12s 12Amp 50.4V LI-ION BATTERY CHARGER

Link to battery indicator charger thingy

Luxury Mountainboard Travel Bag - Fits 35º long decks with upto 9 inch wheels inc Motor Mounts & Monster Box perfectly! Also fits your charger, pads, helmet & beer!

Arrive like a Pro with a Tailor made LUXURY TRAVEL BAG. This quality bag is the perfectly sized to fit your fully assembled 35° with 8 inch wheels into.

On the exterior, the Luxury bags Double Strength Chunky Zipper, un-zips all the way round to allow easy entry for the board. The LUXURY TRAVEL BAG is padded with 10mm EVA foam at the top, the bottom & at the sides to protect your board from impacts during transit. Top quality Stainless Steel Zippers, pimped out with custom made TRAMPA Zipper Pulls, makes zipping & un-zipping the bag a total pleasure. For your security whilst traveling your bag is supplied with a Padlock & key.

CHUNKY CARRY HANDLES join at the side of the bag & with the use of a velcro strap they connect comfortably together. Brushed Aluminum Quick Release Dog Clips attach or remove the Double Padded & Adjustable length Shoulder Strap, making carrying it down the beach or through the airport as comfy as possible. There is also a quick access Exterior Travel pocket for storing documents and the likes & Re-Enforced Grab Handle at the end of the bag to assist in lugging the bag around.

The interior of the bag is lined in strong Nylon making slipping your board into the bag very easy to do. It also has Super-long Velcro Pockets that run the entire length & depth of both sides of the bag, allowing you to be able to safely store your Bar & lines within. Steady straps wrap over the deck, anchoring it in place to avoid rolling around, making it more comfortable to carry.

The Luxury Travel Bag is best used in conjunction with the TRAMPA MUCK OFF BAG, as its name suggests, it keeps the muck off & keeps the Luxury bag clean!!

The BigBoi Deck is made for the Big Boys out there! (Anyone with long legs or roughly taller than 5 foot 10 Inch) or riders with a really wide stance. It measures 73cm from crease to crease & comes in 3 flex's to suit just about every rider weight out there.

To fit the Massive Monster

READ MORE...

Complete Deck Weight

Deck Ply 16 ply 17 ply 18 ply
Blank Deck Weight 3,070g 3,250g 3,430g
Component Weight 12,531g 12,531g 12,531g
Complete Deck Weight 15.6 kg 15.8 kg 16.0 kg

Component Weights

Cusom CNC Precision Mountainboard Trucks1,700g
Custom BULL BARS for MOUNTAIN BOARDS 257g
SGD Motor Mount with PULLEYs - NO Filters or Motors2,308g
2x 6376 160Kv TRAMPA DC Motors with Basic Filters 1,910g
Custom Motor Filters - HALF or FULL Cage 210g
2WD Mk III MASSIVE Monster Box fits 2x VESC 6 Mounting Panel 1,781g
Amazing TRAMPA VESC 6 MkVI - Maximum power!464g
12s7p 21700 PCB Cell Pack with BMS - 35Ah1,494g
VESC Connect NRF Wireless Dongle - INTERNAL Antenna 4g
Custom FRONT Wheel Choice - Any wheel that fits886g
Custom REAR Wheel Choice - Any wheel that fits 636g
ABEC 7 12x28x8mm Mountainboard Bearings 184g
Custom Binding option - Use Heel Straps for control!553g
MASSIVE Monster Box LUXURY Cover with Pockets108g
MASSIVE Monster Box - Rugged OXFORD Weave 36g
Total component weight12,531g
Custom Mountainboard Truck CNC Precision made 16 or 17 Inch wide Mountainboard Trucks 'Channel Style (Spring) or 'Double King-Pinned' (Skate) Style
CUSTOM BINDINGS - Build your own Bindings & colour combo!
Build your own Custom TRAMPA Wheel to fit to your SPUR GEAR DRIVE Motor Mount. You can fit PHATLADS, SUPERSTARSS, PRIMO's or  MEGASTAR's DEEP DISH MEGASTAR's! 8, 9 or 10 Inch wheels of awesome selection for on & off road! Amazing!!
TRAMPA 35° 9/73 BIG-BOI 2WD Electric Mountainboard Deck with WINGS - WINGS give safe cable routing, adds W Shaped concave & the increase the width of the deck from 9 to 10 Inches

Blank deck weight chart

Deck Ply 16 ply 17 ply 18 ply
Blank Deck Weight 3,070g 3,250g 3,430g
General Flex Rating firm stiff very stiff
----------------------------------------------------
 
TRAMPA's SPUR GEAR DRIVE Electric Mountainboard is sensational to ride. Using a high gear ratio (potential of 1/7), it has an acceleration performance similar to that experoenced when riding motor cross bike & is the perfect option if you wish to accelerate incredibly fast, go across rough terrain & climb the steepest of hills around you.

----------------------------------------------------

Light weight riders are good using the Light weight POM Slave Pulleys, but if you are a big guy, say over 85kg then you should seriously consider paying the extra & taking the heavier Steel Pulleys, as these are MUCH stronger & can for sure handle a lot more abuse being thrown at them than the POM pulleys, which have seen heavier guys shred teeth from wanting too much fun!!

GEARING OPTIONS to Suit all riders

10T STRAIGHT Cut
Motor Pulley / 58 Tooth POM Slave Pulley - Gearing ratio 1-5.9
10T HELICAL
Cut Motor Pulley / 58 Tooth POM Slave Pulley - Gearing ratio 1-5.8
10T HELICAL Cut Motor Pulley / 57 Tooth STEEL Slave Pulley - Gearing ratio 1:5.7
9T  HELICAL
Cut Motor Pulley / 63 Tooth STEEL Slave Pulley - Gearing ratio 1-7

----------------------------------------------------

Adding 9 inch wheels at the rear of your board will increase grip considerably in soft conditions & give you an increase on top speed of around 3mph!! It all depends on how hilly it is around you, how heavy a rider you are and the kind if riding you like to do as to whats best, the best thing with TRAMPA products is that you are never left without options if you want to change the performance somehow........ Speak to the team support@trampaboards.com if your not sure...

----------------------------------------------------

A Board like this is best ridden off road, away from traffic enjoying the countryside, exploring dirty routes you have seen when driving & have only ever dreamed of riding before.... Please ride away from Traffic & not towards it....

----------------------------------------------------

LOADED Deck means EVERYTHING included! (6376 Motors & Motor Protection FILTERS,  Heel Straps, BULL-BARS, LUXURY & MUK-OFF Battery Box Covers, relevant FAST-CHARGER to match the Battery style you choose, is sent fully assembled & tested by the team, then packed in a MUCK-OFF Bag & Stowed in a padded LUXURY TRAVEL Bag).

CUSTOM - You get the minimum board sent in component form without Assembly & NON of the above is supplied as standard, however everything you require can be selected & will cost no more than a loaded board if you do so!

BATTERIES are NOT INCLUDED in the sale of any of the Boards.
For links to Batteries & Options Go here
9-69 Deck Fits Classic Monster Box (upto 22Ah)
9-73 BigBoi Deck - Fits Classic & Massive Monster Box (upto 35Ah)
The 9-73 is 4cm longer than the 9-69. If you are taller than 176cm (5’9”) or have a wide riding stance then we recommend you take the 9/73.

----------------------------------------------------
 
TRAMPA's LOADED Boards are sold to you FULLY Assembled & arrive to you In a Muck off bag, thats strapped into a Luxury Travel Bag, with absolutely everything you need fitted & fully tested with the correct BEST Charger sent with it as standard.

You get Everything except Batteries....!!

Its just about impossible for us to be able to send our boards with batteries in. We are able to sell & install them for you if you are to collect from Nottingham, but the size and power capability of the pack makes it very tricky (Desperately expensive) to ship.

 
----------------------------------------------------
 
BATTERIES ARE NOT INCLUDED in the sale of the products that TRAMPA sells. Batteries are expensive to purchase & can be deemed as dangerous by the shipping companies meaning they can be difficult to ship, especially internationally. 
We realised the battery shipping issue & decided to incorporate the problem into our product design, therefore now offering different  solutions. Although its a bit of a pain in the ass to have to purchase the cells separately, its far easier & less expensive on the shipping side of things & lets face it there are lots of companies specialising in the distribution of the cells all around the world all selling them much cheaper than what we could supply them to you, so in an attempt to side step the shipping problems & save you some cash for you to purchase them yourself locally.
Batteries are in huge demand as there has been huge growth in all electrical products on the market, specially in the DIY side of things which is kind of where the TRAMPA BOARD position's itself in the market... So in our design we offer alternative solutions to be able to power your board using Li-Po of Li-Ion cells... 
There are links to the batteries that fit all the different boxes here & depending on how far you wish to go on a single charge will determine what cells you should fit.
As a guide & roughly speaking, 1000mAh (1Ah) is roughly the equivalent to 1 mile of average riding. This claim is very factor dependent & there are many factors determining the outcome such as wheel size, tyre pressure, road surface, weight of rider, rate of acceleration, top speed, cruise speed, the gradients the boards are being ridden on & of course the gearing selection of the rider.... Light weight riders will go further...
The Bigger the battery, the further you will go. We offer sized battery boxes. The Classic Monster Box is able to fit up to 22A Li-Po cells, the same box can fit TRAMPA's 21A Li-Ion Cell Pack. Classic MONSTER Boxes can be fitted to any size Mountainboard Deck, but if you want the furthest range, up to 35 MILES, then you need to fit the MASSIVE MONSTER Box. The Massive box is capable of fitting a 21700 12s7p cell pack & using the best 21700 cells out there is capable of 35Ah of range.

----------------------------------------------------

WARNING!!!
Mountainboarding, Longboarding, Electric Mountainboarding, Kiteboarding, Skateboarding, infact any version of boarding of any kind, is obviously dangerous. Accidents are deemed as 'Part of the fun' & are most likely inevitable.
To limit injury in the event of an accident, it is advised that you should wear as much protective clothing as you can bare to wear in an attempt to protect yourself from injury.
When miss-used, all kinds of bizarre & exceptional accidents  could & do happen, any of which could easily result in death. So always take care & never takes risks if you are not prepared to bare the consequences. You, the rider, is & are 100% fully responsible for your actions & or any accidents that may occur from riding any TRAMPA BOARD.

----------------------------------------------------

We advise that you never ride on the roads & most importantly, if you do ride on roads that you always ride well away from any traffic. Hitting a car, bus or Lorry whilst riding a skateboard will most likely result in death so we advise you don't do it. Anyway in most countries around the world it is still illegal to ride the devices we sell on the roads or highways & it has been herd of that crime busting Police from all around the world, do in fact have the power to even confiscate your device, so always be respectful when negotiating with the authorities over legislation of whats right or wrong & your right to ride the roads.... Here in the Uk we have no rights to ride on the roads so let that be a warning.

If there is no cycle path for you to ride then please choose to ride the sidewalk or pavement instead of the road & then take your time & steer well clear of anything that's moving... Give way to all pedestrians, most of them have ear phones in & do not hear you coming so go steady and don't startle by whizzing past them closely & in particular when riding off road look out for, give priority too & give plenty of space to pass dog walkers as they often have an excited animal pleased to see you at the end of a tether, which of course can easily get tangled with you & your equipment & well, lets face it we don't want to hurt the doggie, upset the waker or hurt the rider & where always possible stay well away from all/any moving traffic. Always expect the worst scenario to happen in all cases as vehicle drivers will always win on who comes off best after a collision if competing to be in the same space at the same time, so we beg you to please never take a risk, its just not worth it.

----------------------------------------------------

Always ride with as much impact protect equipment as you can possibly bare to wear, accidents are inevitable & you are 100% responsible for your own safety at all time, so please check your board often for anything broken or loose & take care as you proceed on the board as these things are very powerful, dangerous in the wrong hands....!!!

----------------------------------------------------

This Electric TRAMPA Deck is constructed using the following components & parts...

1x 2WD TRAMPA ELECTRIC Mountainboard Deck with WINGS & Trims
2x Precision CNC ATB Trucks with Springs/Dampa's or Barrels
1x Mountainboard Bull Bars for fixing lights, camera's & sat nav devices
1x TWIN SPUR GEAR DRIVE Motor Mount with POM or Steel Pulleys
1x 3800w 6376 Custom Kv TRAMPA Out-runner motors
1x Motor Filters - Half or Full Cage option
2x CUSTOM VESC 6 SPEED Controllers with NRF Connection
1x 21700 PCB based self assembly Li-Ion Battery pack with built in BMS - NO Cells
2x Any size or style TRAMPA Wheels that fit the Front
2x Any size or style TRAMPA Wheels that fit on the Rear
1x TRAMPA ABEC 7 or CERAMIC 12mm Mountainboard Bearings
1x Build your own Custom TRAMPA Bindings with Heel Straps
1x Amazing TRAMPA WAND Remote Control Included
1x MASSIVE Monster Box LUXURY Cover with Pockets
1x MASSIVE Monster Box reflective Splash Proof Cover
1x 12Amp Li-Ion Charger
1x Re-enforced LUXURY Travel BAG pimped out with TRAMPA Zippers
1x MUCK OFF bag to keep your LUXURY Bag clean & MINI Stash Bag for your personals.
1x Colour coordinating complete deck TRAMPA VINYL Sticker kit
Please select what ply 9/73 2WD BigBoi WING Deck you would like
Please select what ply 9/73 2WD BigBoi WING Deck you would like

16ply 9/73 BigBoi 2WD Deck - FIRM
16ply 9/73 BigBoi 2WD Deck - FIRM

17ply 9/73 BigBoi 2WD Deck - STIFF
17ply 9/73 BigBoi 2WD Deck - STIFF

18ply 9/73 BigBoi 2WD Deck - STIFFEST
18ply 9/73 BigBoi 2WD Deck - STIFFEST

Quantity required:
We have enough parts to make…  
From £2,250 - each

Excluding VAT
HCC: 9506911000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

This model is TRAMPA's Fully Loaded Spur Gear Drive Mountainboard wearing the latest MKIII MASSIVE MONSTER Box thats installed with the 21700 35Ah Cell Pack - The Fully Loaded Boards come with everything you could ever need & more

TRAMPA's 21700 12s7p cell pack is a self assembly & serviceable mechanical battery pack (solder-less self-assembly). Its packed with huge performance of up to 35Ah! It has its own 18s VESC based BMS installed into the Box & the entire cell pack takes just 2.5 hours to charge using the 12A charger this Fully Loaded board comes with.

The 35Ah cell pack provides huge range. As a guide & taking into account all the major determining factors such as rider weight, rate of acceleration, terrain severity, ride surface, wind & temperature etc, that approximately 1Ah of power is equates to roughly 1 mile of ride distance, therefore given the best conditions & a rider that's not over weight, that when using TRAMPA's 35Ah 21700 Cell pack fitted with the genuine branded cells to achieve 35 Miles of riding. Lighter riders will get more, heavier riders less.

The beauty of the TRAMPA self assembly Cell packs is that should any one cell ever go down or bad, through the VESC TOOL it is possible to identify the group of bad cells for further inspection or replacement. They are approx j £5-£10 each to replace, where as the Li-Po cells, if 1 of those cells in a group of 6 goes down, you have to replace the entire pack of 6 cells which in today's money is around £200 plus tax. The Li-Po cells are said to pack a bigger punch & don't suffer as much 'battery sag' when they are half spent, but also its been said that at 50% on a Li-Po they can loose the 2nd 50% in amazingly 15% of the time!! lol its hard to know whats best, if you are looking for range then this is the cells pack & Board for you!

Once assembled, spun-up & tested at the TRAMPA HQ, the fully assembled SGD board is packed into to a Muk-off bag, then slipped into a Luxury travel bag & then shipped at an amazingly quick pace through UPS or DHL or FEDEX (Soon) anywhere in the world with delivery in no less that 2-3 days in most instances....

High quality boards deserve high quality accessories, which is why this LOADED board comes as standard with The WAND & the 12A Fast Charger that will charge you from low to full in less than 2.5 hours as standard.

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon