This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

18ply 35° 9/73 TRAMPA BigBoi Mountainboard Deck - Fix the WINGS to the deck to add concave & the increase the width of the deck

18ply 35° 9/73 TRAMPA BigBoi Mountainboard Deck - Fix the WINGS to the deck to add concave & the increase the width of the deck
RRP
£150+

In order to make the Deck 4WD you must use TRAMPA's 9-73 BigBoi Mountain Board Deck, this has enough space to fit the MASSIVE Monster Box between your legs which can house 2x HD-60T with 21700 cells or 4x VESC6 mkV with 18650 cells or 20Ah Li-Po cells

• Deck can be used for all disciplines of  mountainboarding, is best suited to long distance & cruisy freeride.

• Designed to accommodate the taller person stance, 17ply or 18ply only - For Big Boys!!.  

TRAMPA's 35° ATB MOUNTAINBOARD DECK has been specifically created to perfectly fit TRAMPA's new range of electrical products. 

 
 Now made to fit the Trampa Wings! 

Wings are an injection moulded riser pad with a foot-hugging W shaped concave & integrated cable routing channel on the underside allow for under-foot cable routing from the battery boxes to the motors.   

Wings also widen the deck to 10 inches!!!  Adding extra leverage beneath the toes & heels, giving you tighter turns & deeper carving!   


TRAMPA decks are considered the strongest customisable decks on the market.   

Their performance is un-matched by any other brand! Once cooked our impenetrable composite weave is so strong that the magic material will not split or break in anyway.   

Our decks come in a range of lengths and ply to accommodate any environment, land air and sea(beach).   

Regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee!   


The stiffness of a TRAMPA deck is measured in "Ply", referring to how many layers of the secret formula material are used to make the deck. The more ply added, the stiffer & heavier the deck will be, ranging from 11-15ply in the Short decks and 15-18ply in the Long. There’s a perfect TRAMPA deck for everyone! 

TRAMPA decks are universally fitting and can be drilled to fit all Truck or Binding systems known - this makes TRAMPA decks the perfect option when choosing an upgrade for your existing setup. 

Throughout years the riders have put them to their paces and  nobody has ever broken a TRAMPA deck! 

Smaller/lighter riders benefit from shorter and lighter low ply decks such as the 12ply 15° short which works perfectly with the lightweight Skate Trucks, whereas heavier riders need longer, stiffer & generally more robust equipment such as the 17ply 35° spring trucks. 

Please see the flexometer guides to help you find your perfect deck.  

If you’re still unsure as to what the best ply and deck is for you and would like some guidance then please fill in the "Which deck for is me questionnaire" by mailing this link.   

 

 

How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


The BigBoi Deck is made for the Big Boys out there! (Anyone with long legs or roughly taller than 5 foot 10 Inch) or riders with a really wide stance. It measures 73cm from crease to crease & comes in 3 flex's to suit just about every rider weight out there.

To fit the Massive Monster Box you must have the BigBoi Deck. By doing so allows you to install the 21700 cell pack & achieve approx 35 miles or range.

Weight: 3,450g
What colour stickers would you like ?
What colour stickers would you like ?

SILVER Vinyl Stickers
SILVER Vinyl Stickers

BLUE Vinyl Stickers - OUT OF STOCK
BLUE Vinyl Stickers  - OUT OF STOCK

RED Vinyl Stickers
RED Vinyl Stickers

WHITE Vinyl Stickers
WHITE Vinyl Stickers

Quantity required:
The total number of this part in stock is 70
RRP £150 - per deck

Excluding VAT
HCC: 6815120000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon