This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

17ply 35º 1073 HOLYPRO Electric Mountainboard Deck with special CNC channel for housing cables

17ply 35º 1073 HOLYPRO Electric Mountainboard Deck with special CNC channel for housing cables 35º 1073 HOLYPRO Electric Mountainboard Deck with special CNC channel for housing cables Drillage for Trucks - Accurate and neat Drillage for Bindings, countersunk with neat finish Edging of deck for a HOLYPRO Deck 3 Foot of 9 Inch Wide Jessop Grip Tape for Longboards Marine Grade Stainless Steel Complete ATB Deck Bolt Kit for ALL 35º SOLID Decks - 12/17ply 130mm - Hand made TRAMPA Vinyl Sticker 580mm - Hand made TRAMPA Vinyl Sticker M3 x 4mm Dome Headed Head Bolt DIN6912 Marine Grade Stainless Steel 5mm Carbon Fibre Riser Pad for fitting cables under the deck on E-Boards 4g x 1/2 CSK Pozzi Screws Zinc plated PCB For 10-73 BigBoi TRAMPA Electric Mountainboard - connects with Screws into the deck fitting underneath the foot
RRP
£350
inc tax
schematic

The 10-73 BIG-BOI 35° Holy Pro Electric Deck is the wider stanced Bigger brother of the Original 9-69 Electric Holy Pro Deck.
Produced using a NEW & LARGER mould, the deck measures 10 inches wide, with a foostance of 73cm. Using an almost identical cut out pattern as the Original 9-69 Holy Pro, the 10-73 Deck will have the same wheelbase - but a wider footstance - Planted!! Perfect for taller / heavier riders.

Produced to work in harmony with TRAMPA’s amazing range of electrical components,  this deck features a specially designed channel for running cables from the MONSTER BOX to the motors, within the center of the deck. Neatly covered & protected by a flexible PCB containing the motor sensor cables (held in position using pan-head screws & grip tape), the cables are then passed between the tip of the deck and a riser pad, flowing neatly into the motors.

This all keeps important cables sealed out of the way - safe & dry – while improving the finished look of the board 10x.

The 10-73 BIG-BOI 35° Holy Pro Electric Deck is only available in 17 ply. Pre Drilled for your Trucks & Bindings, with GRIP TAPE  & Marine Grade Stainless Steel Complete Deck Bolt Kit. Dont forget any choice of Vinyl Stickers you like!

 


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.


 

35º 1073 HOLYPRO Electric Mountainboard Deck with special CNC channel for housing cables

TRAMPA's 35° HOLYPRO ELECTRIC MOUNTAINBOARD DECK has been specifically created to perfectly fit TRAMPA's new & stunning range of Electrical products. Having been Asymmetric re-shaped the special factory made OVAL HOLYPRO HOLES have been re-positioned, gaining space in the center of the deck so that the amazingly flexible whilst still un-breakable deck can accommodate the 2 NEW & very special features, completely unique to TRAMPA, that allows the perfect fitting of the super flexible Silicone cables that carry the battery power from the TRAMPA recommended 'Center of the Deck, Surface Mounted MONSTER Box', out though sealed off exit holes in the underside of the Monster Box into a special 'Sealed Off CNC precision cut Channel' that cuts through the center of the deck, running under the riders trailing foot, into & through a special 'Flow hole' in the tail of the deck to allow the cables to flow through the crease of the deck & be fed around the Trucks in a tidy non interfering route with either the Trucks or when riding in anyway but so that the bullet connecters align perfectly with & connect neatly into the motor. 

The CNC Channel in the center of the deck has a 2mm shelf running around the perimeter of the channel to fit the lid which can at the point os assembly be glued & screwed to keep your cables completely protected, away from interference & the elements & to impress on-lookers who need to know how the power is delivered from the box to the motors!

TRAMPA decks are considered the strongest, poppiest, most Customisable Decks on the market. Their performance is un-matched by any other brand! You will 'Pop' higher & have a more 'Cushioned landing' all thanks to the incredible performance of the TRAMPA deck! Once cooked our impenetrable composite weave is so strong whilst still so flexible, that the magic material will not split, delaminate or break in anyway shape or form, regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee! 

TRAMPA's 10-73 'BIG-BOI' 35° HOLYPRO Electric Deck is the wider stanced Bigger brother of the Original 9-69 Electric Holypro Deck.

Produced using a NEW & LARGER mould, the deck measures 10 inches wide, with a foostance of 73cm hence the name 10-73

Using an almost identical cut out pattern as the Original 9-69 Holy Pro, the 10-73 Deck will have the same overall wheelbase as the original but a  4cm wider footstance area to give a very planted feeling when riding & mouch more comfortable leg positioning feeling for taller riders.

Produced to work in harmony with TRAMPA’s amazing range of electrical components,  this  10-70 Electric deck features a specially designed channel within the center of the deck for running the Motor cables from the MONSTER BOX to the motors, Neatly covered & protected by a flexible PCB containing the motor sensor cables (held in position using pan-head screws & grip tape), the cables are then passed between the tip of the deck and a riser pad, flowing neatly & out of harms way into the motors.

This all keeps important cables sealed out of the way whilst also safe & dry & of course while improving the finished look of the board.

The 10-73 BIG-BOI 35° Holy Pro Electric Deck is only available in 17 ply. It comes to you Pre Drilled for TRAMPA Trucks & Bindings, fitted with GRIP TAPE & supplied with a Marine Grade Stainless Steel Complete Deck Bolt Kit & dont forget any choice of Vinyl Stickers you like!!!


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.

M3 x 4mm Dome Headed Head Bolt DIN6912 Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

This Bolt is DOME HEADED, meaning that when screwed into position it sits low & neatly over the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-TRAMPA MOTORS

4g x 1/2 CSK Pozzi Screws Zinc plated

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

PCB For 10-73 BigBoi TRAMPA Electric Mountainboard - connects with Screws into the deck fitting underneath the foot

This beaustiful PCB covers the hidden cables in the TRAMPA Electric Mountainboard Deck & is used instead of tiny cables to connect the VESC the Hall Sensors in the Motors. The TRAMPA PCB is fitted with JST Connectors & simply plugs & plays, nice easy connection :-) The TRAMPA PCB is fitted to the TRAMPA Electric Mountainboard deck as standard inclusion, if you purchase the deck you get the PCB.

The TRAMPA PCB has been designed to work in conjunction the new 2018 Monsater box. Many of the TRAMPA Electric MountainBoards use the 2018 Monster Box for its power housing, of which the new 2018 Monster Box also hoouses the VESC in, Yes thats right the VESC are now mounted in the center of the deck inside of the 2018 Monster Box. :-) 

The Monster box is capable of housing upto 12s6p (or other similar high power cell combinations aswell as 2xVESC) & of course the Monster Box is mounted on the Top Side of the Deck. 8x rubber sealed Holes on the underside of the 2018 Monster Box Allow the Cables to pass through without allowing moisture to enter into a special CNC precision cut channel in the deck wherw the 6 Motor power cables slot into perfectly.

The TRAMPA PCB The Hall Sensor cables also pass though these underside holes, but 

to  has been CNC'd on the top surface to It fits onto a CNC precision shelf covering all the powercables from the Monster Box to the back end of the deck with 3mm Panhead Screws into the surface of the deck fitting underneath the foot, hidden by the grip tape 

3 Foot of 9 Inch Wide Jessop Grip Tape for Longboards

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges. Watch your fingers when slicing, please ask an adult to make this work if you are under 16 & please remember, when you draw on the back of the grip tape remember its a mirror image so do everything in switch! Use a template for best results... :-)

130mm - Hand made TRAMPA Vinyl Sticker

Everybody loves stickers, especially TRAMPA VINYL stickers! TRAMPA vinyl's are pain-stakingly hand made at TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years. These BLUE vinyl stickers are sized to fit onto the top of the Trampa deck, the dimensions are 130mm long x 28mm high.

There are loads of colours to choose from and the price starts at just 30 pence each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap to do... Help TRAMPA the world with the Pimp-est vinyl stickers EVER!

To Apply - Ensure the surface is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly. This VIDEO may help...

Everybody loves stickers, especially TRAMPA stickers! TRAMPA's Old Skool VINYL Stickers are pain-stakingly Hand Made at the TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years and most likely much longer! These BLUE Vinyl Stickers are sized to fit underneath the TRAMPA deck, the dimensions are 370mm long x 70mm high.

There are loads of colours to choose from & the price starts at just £2.50 each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap and easy to do...

Help TRAMPA the world with the Pimp-est vinyl stickers EVER! To Apply the Stickers - Ensure the surface you re applying too is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly.

580mm - Hand made TRAMPA Vinyl Sticker

.

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
70 - 140 kg
(11 - 22 stone)
17 ply 3,360g stiff

The 10-73 BIG-BOI 35° Holy Pro Electric Deck is the wider stanced Bigger brother of the Original 9-69 Electric Holy Pro Deck.
Produced using a NEW & LARGER mould, the deck measures 10 inches wide, with a foostance of 73cm. Using an almost identical cut out pattern as the Original 9-69 Holy Pro, the 10-73 Deck will have the same wheelbase - but a wider footstance - Planted!! Perfect for taller / heavier riders.

Produced to work in harmony with TRAMPA’s amazing range of electrical components,  this deck features a specially designed channel for running cables from the MONSTER BOX to the motors, within the center of the deck. Neatly covered & protected by a flexible PCB containing the motor sensor cables (held in position using pan-head screws & grip tape), the cables are then passed between the tip of the deck and a riser pad, flowing neatly into the motors.

This all keeps important cables sealed out of the way - safe & dry – while improving the finished look of the board 10x.

The 10-73 BIG-BOI 35° Holy Pro Electric Deck is only available in 17 ply. Pre Drilled for your Trucks & Bindings, with GRIP TAPE  & Marine Grade Stainless Steel Complete Deck Bolt Kit. Dont forget any choice of Vinyl Stickers you like!


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.



TRAMPA's 35° HOLYPRO ELECTRIC MOUNTAINBOARD DECK has been specifically created to perfectly fit TRAMPA's new & stunning range of Electrical products. Having been Asymmetric re-shaped the special factory made OVAL HOLYPRO HOLES have been re-positioned, gaining space in the center of the deck so that the amazingly flexible whilst still un-breakable deck can accommodate the 2 NEW & very special features, completely unique to TRAMPA, that allows the perfect fitting of the super flexible Silicone cables that carry the battery power from the TRAMPA recommended 'Center of the Deck, Surface Mounted MONSTER Box', out though sealed off exit holes in the underside of the Monster Box into a special 'Sealed Off CNC precision cut Channel' that cuts through the center of the deck, running under the riders trailing foot, into & through a special 'Flow hole' in the tail of the deck to allow the cables to flow through the crease of the deck & be fed around the Trucks in a tidy non interfering route with either the Trucks or when riding in anyway but so that the bullet connecters align perfectly with & connect neatly into the motor. 

The CNC Channel in the center of the deck has a 2mm shelf running around the perimeter of the channel to fit the lid which can at the point os assembly be glued & screwed to keep your cables completely protected, away from interference & the elements & to impress on-lookers who need to know how the power is delivered from the box to the motors!

TRAMPA decks are considered the strongest, poppiest, most Customisable Decks on the market. Their performance is un-matched by any other brand! You will 'Pop' higher & have a more 'Cushioned landing' all thanks to the incredible performance of the TRAMPA deck! Once cooked our impenetrable composite weave is so strong whilst still so flexible, that the magic material will not split, delaminate or break in anyway shape or form, regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee! 

10-73 BigBoi 35° HOLYPRO ELECTRIC Mountainboard Deck
CNC & Waterjet charge for work on 10-73 BigBoi Electric Mountainboard Deck
Precision drilled Truck mounting holes.
Drilled for Bindings with a neat & flush countersunk finish
Edged with a rough cut file & hand sanded until silky smooth...
3 foot x 9 Inch wide of fitted Jessop Grip Tape
Complete ATB Deck Bolt Kit for ALL 35º SOLID Decks - 12/17ply
130mm - Hand made TRAMPA Vinyl Sticker
580mm - Hand made TRAMPA Vinyl Sticker
M3 x 4mm Dome Headed Bolt - Marine Grade Stainless Steel
5mm Carbon Fibre Riser Pad for fitting cables under the deck on E-Boards
4g x 1/2 CSK Pozzi Screws Zinc plated
PCB For 10-73 BigBoi Electric Mountainboard
Quantity required:
We have enough parts to make…  
RRP £350 - per deck

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon