This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

15° Short TRAMPA Deck on 10mm HOLLOW axle Skate trucks HYPA wheels & CAMLOCK Bindings - 053 KITEBOARD

15° Short TRAMPA Deck on 10mm HOLLOW axle Skate trucks HYPA wheels & CAMLOCK Bindings - 053 KITEBOARD 15° SHORT TRAMPA kiteboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit 9.525mm HARDENED & HOLLOWED Steel axle Skate Truck CARBON Print Hypa hub & Custom Tyre Camlock Bindings - Black straps on Black foam with Black L Brackets & Black Camlocks 15° Short TRAMPA Deck on 10mm Hollow axle Skate trucks HYPA wheels & CAMLOCK Bindings - 053 BLACK KITEBOARD15° Short TRAMPA Deck on 10mm Hollow axle Skate trucks HYPA wheels & CAMLOCK Bindings - 053 BRONZE KITEBOARD15° Short TRAMPA Deck on 10mm Hollow axle Skate trucks HYPA wheels & CAMLOCK Bindings - 053 GUNMETAL KITEBOARD15° Short TRAMPA Deck on 10mm Hollow axle Skate trucks HYPA wheels & CAMLOCK Bindings - 053 SILVER KITEBOARD
RRP
£350
inc tax
schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...

13ply 15° Short Blank Deck

The 15° Short TRAMPA Mountainboard deck is our original deck shape & is still our starter model today! Its dimensions make it excellent for all sizes of rider, from youngster to adult starter. It's designed to specifically fit Skate Trucks & is often purchased as an up-grade to replace broken, or non-responsive wooden decks supplied by other brands.

Used for Mountain Boarding or Kite Boarding.

The 15° Short is available in 4 different flex rates, 12ply being the most flexible & 15ply the stiffest. Please use the FLEXOMETER to find the most suitable deck ply for you.



TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.

9.525mm HARDENED & HOLLOWED Steel axle Skate Truck

Be it Mountainboard or Kiteboard, TRAMPA's own 9.525mm Hollowed & Heat Treated, Steel Axle Skate Trucks (often referred to as 10mm but accurately measured as 3/8ths of an inch imperial size), are the recommended Truck choice for all small or beginner riders. These Trucks need to mounted at a 15º Angle in order to steer correctly and so you will see them fitted to the TRAMPA 15º decks as this is the perfect mounting angle for them.

Hollowing the steel axle reduces weight drastically & the heat treating process add's in extra strength. To retain as much strength as possible the axle is 1x long Axe running the entire width of the hanger, it is positioned into the mould as the alloy is casted around it. The alloy body of the TRAMPA Hanger & the Embossed Baseplate are high quality Bead polished & lacquered to give the best protection against the harsh elements they will be used in.

The Pivot cup pushes into the pivot cup housing of the Baseplate & Black 98a Rubber Bushings sit within their housings cushioning the metal parts of the skate truck, protecting them from rubbing against each other & allowing the movement in the truck which converts to steering. These little parts get squashed & often suffering harsh environments they incur a lot of abuse & may fail, so in order to maintain max performance from your trucks you to need service/replace these parts over time.

Steel kingpin connects the Hanger to the Baseplate. This can be upgraded to Stainless Steel or TITANIUM using the attributes in your purchase. The Titanium kingpin is half the weight of steel & never rusts! You can also purchase a Marine Grade Stainless steel (MGST) Bolt kit at a discounted price with your truck purchase, these bolts will never rust on you! Accompanied by the 44mm axle spacer & 1mm shim washers to position the bearings in the exactly, a 3/8ths of an inch MGST Nylock Axle nut tightens perfectly on holding the wheel in the sweet spot on the axle.

TRAMPA have designed & created a special Bearing Conversion spacer which is perfect in converting the standard 12mm bearings to fit to the 7/16ths (10mm) Hollow axle. This bearing conversion spacer also acts as the perfect speed washer allowing the hub to fit snug on the Axel, giving the wheel the perfect spinning position.

Including the Axel Nuts & oversized Washers, the truck weighs 525 grams each, 1.05Kg per pair. Super light! Its basically an oversized Skate Board Truck which has been beefed up to give the some extra strength to help the extended axles which will be used on the rough terrain. 

This Skate style Truck is the lightest Truck system on the market! Due to its lightness, its over all strength is not as good as other Truck systems offered on the TRAMPA website, so this Truck is mostly suitable for lighter weight riders, especially kids, teenagers and ladies, but if used sensibly is also suitable for heavy riders up to 80kg.

Despite the fact the Skate style Trucks are not the strongest Truck system available, Top Riders accept the fact they may need replacing over time as the weight and cost of the Truck is difficult to match, & many adult sized Kiteboard riders choose to ride these basic Skate style Trucks simply because they are substantially lighter than many of the other trucks on the market. The fact that they may bend or even break under seriously heavy usage or from a major accident bears no odds to them because at £25 each they are very cheap to replace....

The Truck houses 10mm HOLLOW axle's which have enough space on them to house any wheel on the market. TRAMPA have just released some spacers to convert bearings from 12mm to 10mm, these fit snugly to the Axel whilst also adding the perfect spacing to the bearing.

Be it Mountainboard or Kiteboard, TRAMPA's own 9.525mm Hollowed & Heat Treated, Steel Axle Skate Trucks (often referred to as 10mm but accurately measured as 3/8ths of an inch imperial size), are the recommended Truck choice for all small or beginner riders. These Trucks need to mounted at a 15º Angle in order to steer correctly & so you will see them fitted to the TRAMPA 15º decks as this is the perfect mounting angle for them.

Hollowing the steel axle reduces weight drastically & the heat treating process add's in extra strength. To retain as much strength as possible the axle is 1x long Axe running the entire width of the hanger, it is positioned into the mould as the alloy is casted around it. The alloy body of the TRAMPA Hanger & the Embossed Baseplate are high quality Bead polished & lacquered to give the best protection against the harsh elements they will be used in.

The Pivot cup pushes into the pivot cup housing of the Baseplate & Black 98a Rubber Bushings sit within their housings cushioning the metal parts of the skate truck, protecting them from rubbing against each other & allowing the movement in the truck which converts to steering. These little parts get squashed & often suffering harsh environments they incur a lot of abuse & may fail, so in order to maintain max performance from your trucks you to need service/replace these parts over time.

Steel kingpin connects the Hanger to the Baseplate. This can be upgraded to Stainless Steel or TITANIUM using the attributes in your purchase. The Titanium kingpin is half the weight of steel & never rusts! You can also purchase a Marine Grade Stainless steel (MGST) Bolt kit at a discounted price with your truck purchase, these bolts will never rust on you! Accompanied by the 44mm axle spacer & 1mm shim washers to position the bearings in the exactly, a 3/8ths of an inch MGST Nylock Axle nut tightens perfectly on holding the wheel in the sweet spot on the axle.

This is the lightest ATB truck option on the market! Due to its mega lightness you could argue its over all strength is compromised & arguably it is not as strong as other truck systems in the TRAMPA Truck options, so this trucks suggested use is said to be more suitable for lighter weight riders, i.e. small sized teenagers who require a lighter deck to steer & of course who will not push as many forces through the setup natrally. Larger riders should not use these trucks without being aware of this...

However its often te case that large sized kiteboard riders often choose to ride these trucks simply because they are so much lighter than any of the other trucks, the fact that they may bend over time or even break under seriously heavy usage (They offen get dropped from great heights when kiteboarding always land awqwardly!!) bears no odds to them because they want the lightest of equipment & at only £50 a pair they are cheap to replace....

CARBON Print Hypa hub & Custom Tyre

The 6 Spoke HYPA Wheel is the lightest & strongest plastic injected 7 & 8 inch Hub / Wheel on the market today! Its produced using original DuPont ingredients & the best Injection Moulding machinery, no quality expense is spared during the production of this amazingly strong little hub!

During testing the HYPA Wheels performance surpassed all expectations. :-) This little 8 inch wheel proved to be so strong, when the "Crash Test Dummies" (i mean the Mountainboard Team Riders) inflated their tyres well beyond factory recommendations! (Tut-Tut Naughty-Naughty!) The extra inflation resulted in substantially faster roll speeds, giving them the extra time in the air to complete their huge freestyle moves & still have time land in 1 piece! I'm pleased to tell you there were no explosions from the over inflation to report whilst breaking a HYPA HUB is just about unheard of, something extraordinary has to go wrong before these hubs do! If you have seen some of the crazy stuff the MTB & KTB teams have put the equipment through over the years, with genuinely almost no problems to report, you will have no doubt of the HYPA WHEELS performance capabilities.

HYPA Hubs are available in loads of coordinating colour combinations its difficult to make the decision as to which option you like the most! You can choose from naked Matt Black or White to Painted Gloss Red or Gloss Blue with Painted Black or White TRAMPA Logo's or Printed in Winter or Army Camo, the choice is all yours... :-)

TRAMPA's HYPA hubs are held together using Marine Grade (A4) Stainless steel Nuts & Bolts & will never rust on you. Our bolts are perfect for bad conditions. Not only will the nuts & Bolts never rust on you all the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste, whilst all the Nuts that TRAMPA uses are fitted with the world renowned Nyloc nylon nut locking system, all of these no expense spared small details ensure you get the absolute best product possible! To help prevent you from purchasing imitations, TRAMPA's HYPA Hubs are always TRAMPA embossed between the spokes proving our top quality! 

Your tyre requirements will be defined by the surface you are riding on, however you will be pleased to read that all of the HYPA Hubs will fit into any of the 7 inch Tyres or 8 Inch Tyres on the TRAMPA website. TRAMPA Hubs are also compatible with all known 8 Inch Tyres that are currently on the market, including any other Mountainboard or Dirt Scooter brand.

TRAMPA’s very own & genuine ABEC 5 rated Bearings, push perfectly into the 'Centre Set' bearing housings either side of the hub. The bearings are supported internally by use of a 'Bearing Support Spacer' sitting on the axle in the middle of the hub, guaranteeing the position of the bearings & the smoothest spin rate possible. TRAMPA's Bearings will fit onto 9.525mm, 10mm & 12mm Axles. The metric measurement of 9.525mm, is equal to the US Imperial measurement 3/8ths of 1 inch. Bearing Reducer Sleeves downsize your 12mm Bearings to fit onto 10mm Metric Scooter Axles or 9.525mm (3/8ths of an inch) Imperial Skate Axles. Bearings can be supplied at 50% of the usual retail price when purchased with a wheel... 2x Bearings cost just £2.50 per pair (usually £2.50 each), resulting in a £10 saving per set of 8x bearings, 8 bearings are enough for a set of 4 wheels!

TRAMPA's 200mm x 50mm - 8 Inch wonder wheels are the primary choice sized wheel for many inventors developing sporting equipment requiring very strong whilst very light weight, small pneumatic wheels for their applications to work correctly. Mountainboards, Kiteboards, 2Wheel, Dirt-Scooters, Bikes Skates, Sledges, Trikes, Skikes, Model Planes, Single Seater Planes, Dog Sledding, Dirt Skiing, Transportation Chariots & now lots of exciting electronic applications all due to come to the market very soon, all require an 8 inch wheel for their best movement... If you have a wheeled project on the go & you would like to fit TRAMPA's 8 inch wheels onto it, then in your design you need to use a 12mm axle & you will need to give an axle mounting space of 34.2mm in order to fit the TRAMPA Hubs correctly.

Camlock Bindings - Black straps on Black foam with Black L Brackets & Black Camlocks

TRAMPA CAMLOCK BINDINGS are the number 1 choice of Binding for all top level Kite Boarders. The Camlock system allows the user to 'Lock the Bindings' in the desired position allowing easy step in / step out action. Should the board be dropped on the Bindings when attempting aerial maneuvers (or similar) the Cam-lock system stops the Bindings from "closing-up", which in turn allows the user to be able to easily put their foot back into the Bindings & continue riding without any hassle. 

The EVA Foam Padding underneath the DuPont Plastic Foot Straps wrap snugly over the top of your foot but firm comfortable footwear is still advisable. The EVA Foam Padding is 'Ribbed' & 'TRAMPA Embossed' (proving quality) on the underside of the Footstrap, fine details like this help maintain the foot locked into the Bindings whilst riding at speed over rough terrain.   

A Special Hook on the Base of the Camlock locates into a special slot on the top of the Footstrap. This clever 3 point connection prevents any movement in the connection of the Straps giving the rider the confidence in their equipment to concentrate purely on their riding. The Ladder strap will ultimately wear over time so give care to this part when adjusting it.

Stainless steel Dome Headed Bolts connect through the Footstrap into L-Brackets ensuring no discomfort to the foot. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require. TRAMPA Bindings are supplied with a Marine grade A4 Stainless Steel deck fixing kit included. CAMLOCK style bindings are the serious Kite Board rider’s primary choice binding!

 

 

The 15° Short TRAMPA Mountainboard deck is our original deck shape & is still our starter model today! Its dimensions make it excellent for all sizes of rider, from youngster to adult starter. It's designed to specifically fit Skate Trucks & is often purchased as an up-grade to replace broken, or non-responsive wooden decks supplied by other brands.

Used for

READ MORE...

Complete Deck Weight

Deck Ply 12 ply 13 ply 14 ply 15 ply
Blank Deck Weight 2,075g 2,225g 2,375g 2,525g
Component Weight 3,412g 3,412g 3,412g 3,412g
Complete Deck Weight 5.5 kg 5.6 kg 5.8 kg 5.9 kg

Component Weights

Polished Skate truck - 9.525mm Hardened & Hollowed steel axle 1,043g
CARBON Print Hypa hub & Custom Tyre1,912g
Camlock Bindings - Black footstraps Black L brackets & Camlocks458g
Total component weight3,412g
9.525mm HARDENED & HOLLOWED Steel axle Skate Truck
Camlock Bindings - Black straps on Black foam with Black L Brackets & Black Camlocks
CARBON Print Hypa hub & Custom Tyre
15° SHORT TRAMPA kiteboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit

Blank deck weight chart

Deck Ply 12 ply 13 ply 14 ply 15 ply
Blank Deck Weight 2,075g 2,225g 2,375g 2,525g
General Flex Rating flexi firm stiff very stiff
Please select - Which model do you want...?
Please select - Which model do you want...?
Kiteboard 053 - BLACK Kiteboard 053 - BLACK
Kiteboard 053 - BRONZE Kiteboard 053 - BRONZE
Kiteboard 053 - GUNMETAL Kiteboard 053 - GUNMETAL
Kiteboard 053 - SILVER Kiteboard 053 - SILVER
Please select - Which Ply deck do you require...?
Please select - Which Ply deck do you require...?
9-67 Original 12ply 15º Short - FLEXI 9-67 Original 12ply 15º Short - FLEXI
9-67 Original 13ply 15º Short - FIRM 9-67 Original 13ply 15º Short - FIRM
9-67 Original 14ply 15º Short - STIFF 9-67 Original 14ply 15º Short - STIFF
9-67 Original 15ply 15º Short - VERY STIFF 9-67 Original 15ply 15º Short - VERY STIFF
Save money & weight, Up-Grade to a TITANIUM Kingpin...
Save money & weight, Up-Grade to a TITANIUM Kingpin...
NICKLE PLATED Kingpin - 50% Discounted (+£2) NICKLE PLATED Kingpin - 50% Discounted (+£2)
STAINLESS STEEL Kingpin - 50% Discounted (+£7.50) STAINLESS STEEL Kingpin - 50% Discounted (+£7.50)
TITANIUM Kingpin - 50% Discounted (+£15) TITANIUM Kingpin - 50% Discounted (+£15)
NO upgrade Thanks - Standard Steel for me :-) NO upgrade Thanks - Standard Steel for me :-)
Would you like to purchase a discounted priced grab handle?
Would you like to purchase a discounted priced grab handle?
NO Grab handle thanks
NO Handle - Just drilled For a Grab Handle (+£2.50) NO Handle - Just drilled For a Grab Handle (+£2.50)
BLUE Patch with BLACK logo (+£10) BLUE Patch with BLACK logo (+£10)
RED Patch with BLACK Logo (+£10) RED Patch with BLACK Logo (+£10)
BLACK Patch with BLUE Logo (+£10) BLACK Patch with BLUE Logo (+£10)
WHITE Patch BLACK Logo (+£10) WHITE Patch BLACK Logo (+£10)
WHITE Patch BLUE Logo (+£10) WHITE Patch BLUE Logo (+£10)
WHITE Patch RED Logo (+£10) WHITE Patch RED Logo (+£10)
Save money & your ass - Buy a Booty Wrap with your board!
Save money & your ass - Buy a Booty Wrap with your board!
Booty wrap - Small / Medium 24 - 32 Inch Waist (+£40) Booty wrap - Small / Medium 24 - 32 Inch Waist (+£40)
Booty wrap - Large / X Large 34 - 40 Inch Waist (+£40) Booty wrap - Large / X Large 34 - 40 Inch Waist (+£40)
NO Booty wrap thanks!
Need a Bag to store your board in?
Need a Bag to store your board in?
Muck Off Bag - 20% Discounted! (+£20) Muck Off Bag - 20% Discounted! (+£20)
Luxury Travel Bag - 20% Discounted! (+£80) Luxury Travel Bag - 20% Discounted! (+£80)
Muck Off & Travel Bag - 25% Discounted! (+£95) Muck Off & Travel Bag - 25% Discounted! (+£95)
NO Bags Thanks :-)
Quantity required:
We have enough parts to make…  
RRP £350 - each

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon