This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

10-69 4WD TRAMPA HOLYPRO ELECTRIC 4-Wheel Drive Mountainboard Deck - 2x CNC'd cable channels with cable holes

10-69 4WD TRAMPA HOLYPRO ELECTRIC 4-Wheel Drive Mountainboard Deck - 2x CNC'd cable channels with cable holes GLASS FIBRE SHOULDERED Cable Cover fits over the nose or tail truck fixings for Electric Mountainboard Decks with Wings Complete deck Drillage edging and sanding Marine Grade Stainless Steel Complete ATB Deck Bolt Kit NO Wings - 12-18ply 5mm Carbon Fibre Riser Pad for fitting cables under the deck on E-Boards
RRP
£150+

TRAMPA's 35° HOLYPRO Mountain Board deck is so called because of its special Weight Saving Holes. It is the #1 option for all Top level Riders including all of our Pro Team Mountainboard Riders! Being Slightly shorter than the 35° Long BUT slightly longer than the 35° Short, the 35° HOLYPRO deck offers the best of both worlds in terms of performance & weight BUT it also comes with EXTRAS!! The extra's include the weight saving "Water Cut Holes" that are blasted into the Foot Stance area & at the Tips of both ends of the deck.

The "Frogmouth" cut out shape on the tip of the deck is the same shape as the hole in the VERTIGO & ULTIMATE Trucks. This allows you to uniquely see through your Deck & into the Truck during operation. These impressive holes do not only look awesome but they also save you lots of weight right at the critical tip of your deck, allowing much more nimble-ness without removing any of the stiffness or performance from the deck! HOLYPRO!! The Oval holes & Frogmouth shape can only be made so neatly during the manufacturing process in the factory, therefor they cannot be replicated at home & you should never be able to puchase a copy... some may try but most will fail!!

Its Unique weight saving hole in the tip of the deck means its drill pattern will only fit to TRAMPA Spring Trucks. Spring Trucks are a much stronger design than the Skate Trucks & by far a more suitable option for advanced or quick learning riders. Spring Trucks offer a lot more adjustment, resulting in lots more stability & confidence to the rider. The HOLYPRO Deck has been intelligently shaped to cut back excess material & further reduce weight around the Tip of the deck & to assist the rider steer by adding a long radius on the Toe sidemaking toe sided turns easier.

The 35° HOLYPRO comes as standard pre Drilled to fit your TRAMPA TRUCKS but the bindings holes are left blank for your customisation. Please select from the drop down menus if you want to drill the bindings yourself or if you would like TRAMPA to neatly do this for you at NO EXTRA CHARGE. The 35° HOLYPRO also comes as standard with Grip Tape already fitted, a special Marine Grade Stainless Steel Complete Deck Bolt Kit & any choice of Vinyl Stickers fitted.

Because of its unique shape the 35° HOLYPRO can be used for all applications of Mountain Board Riding including when accompanied with the MAGURA BRAKES or fitted with an ELECTRIC ENGINE CONVERSION. The 35° HOLYPRO is available in 3 different flex rates, 15ply is the most flexible, 17ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some advice.

TRAMPA decks are considered the strongest, poppiest, most Customisable Decks on the market. Their performance is un-matched by any other brand! You will 'Pop' higher & have a more 'Cushioned landing' all thanks to the incredible performance of the TRAMPA deck! Once cooked our impenetrable composite weave is so strong whilst still so flexible, that the magic material will not split, delaminate or break in anyway shape or form, regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee! 

 

GLASS FIBRE SHOULDERED Cable Cover fits over the nose or tail truck fixings for Electric Mountainboard Decks with Wings

Keeps cables tidy on decks with wings light weight fibre pannel - looks stylish too! Used in conjunction with the M5 spacer 

5mm Carbon Fibre Riser Pad for fitting cables under the deck on E-Boards

This Carbon Fibre Riser Pad allows cables to run unobtrusively between the deck & trucks. Can be used for lights or other electric accessories that may require running cables.

Raises ride height by 5mm

M6 x 25mm Countersunk Allen-Key Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-Bindings

M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

TRAMPA's 35° HOLYPRO ELECTRIC MOUNTAINBOARD DECK has been specifically created to work in conjunction with TRAMPA's stunning new range of Electrical products. It is packed full of changes compared to the to the old style HOLYPRO Mountainboard & includes 3 NEW & very special features completely unique to TRAMPA... The special water cut 'Oval HOLYPRO Holes' have been re-positioned 'Asymmetrically', allowing the deck to be drilled for both Regular or Goofy Riding styles, whilst gaining space in the center of the deck at the same time so that the amazingly flexible & of course still un-breakable deck can accommodate our special new features!

The first new feature allows the perfect fitting of the super flexible Silicone coated Motor cables that carry the battery power from the recommended 'surface side of the Center of the Deck' connecting in turn to the Surface Mounted MONSTER Box', which routes the cables out though special sealed off exit holes in the underside of the Monster Box, into a special 'CNC precision cut Channel in the deck' that cuts 8mm deept across the surface of the center of the deck, cutting underneath the riders trailing foot, into & through the second new feature the special 'Cable hole' in the tail end of the deck. The Motor cables are covered using our 3rd NEW feature, buy using a PCB which also houses the Motor Sensir cables. The VESC Cables come out the same hole in the center of the Monster Box & are plugged into the PCB & the PCB is then glued & Screwed into position in the deck, which protects whilst holding in position the Motor cables. The motor & Sensor cables from the motor can be fed around the Trucks in a tidy non interfering route so that the adjoining bullet connecters align perfectly & connect neatly into the battery cables... :-)

The CNC Channel in the center of the deck has a 2mm deep shelf running around the perimeter of the channel to fit the lid which can at the point os assembly be glued & screwed to keep your cables completely protected, away from interference & the elements & to impress on-lookers who need to know how the power is delivered from the box to the motors!

TRAMPA decks are considered the strongest, poppiest, most Customisable Decks on the market. Their performance is un-matched by any other brand! You will 'Pop' higher & have a more 'Cushioned landing' all thanks to the incredible performance of the TRAMPA deck! If you start adding batteries to the underside of your deck you will loose the flex and performance of the TRAMPA Deck...  Once cooked our impenetrable composite weave is so strong whilst still so flexible, that the magic material will not split, delaminate or break in anyway shape or form, regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee! 

2x GLASS FIBRE SHOULDERED Cable Cover for Mountainboard's
1x Complete deck Drillage, Edging Filing & Sanding
8x M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel
8x M5 Nut - Marine Grade Stainless steel Nylock Nut
8x M5 Washer Form B - Marine Grade Stainless Steel
8x M6 x 25 Countersunk Allen-Key Stainless Steel Bolt
8x M6 Nut - Marine Grade Stainless steel Nylock nut
8x M5 Washer Form B - Marine Grade Stainless Steel
2x 5mm Carbon Fibre Riser Pad for fitting cables under the deck on E-Boards
Weight: 460g
Do you wish to add a CLASSIC Monster Box to your TRAMPA Deck??
Do you wish to add a CLASSIC Monster Box to your TRAMPA Deck??

I want a CLASSIC Monster Box with Panel to fit 1x VESC 6 (+£185)
I want a CLASSIC Monster Box with Panel to fit 1x VESC 6 (+£185)

I want a CLASSIC Monster Box with SOLID Sides - NO VESC (+£185)
I want a CLASSIC Monster Box with SOLID Sides - NO VESC (+£185)

I want a CLASSIC Monster Box with Panel to fit 2x VESC 6 (+£185)
I want a CLASSIC Monster Box with Panel to fit 2x VESC 6 (+£185)

I want a CLASSIC Monster Box with Panel to fit 1x HD-60Twin (+£185)
I want a CLASSIC Monster Box with Panel to fit 1x HD-60Twin (+£185)

No Monster Box Thank you

Quantity required:
We have enough parts to make…  
CLEARANCE PRICE for NEW MODEL
RRP WAS £200
NOW £150 - per deck

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon